Lenovo ThinkServer RD330 - 11.2.15 Scheduling Snapshots

Page 337
MegaRAID SAS Software User Guide Chapter 11: Using MegaRAID® Advanced Software
| Recovery Advanced Software
2. In the Select Capacity field, use the drop-down selector to select the appropriate
capacity to use for changes to the base VD.
3. Click Next.
The Enable MegaRAID Recovery wizard - Create Snapshot Schedule wizard
appears as shown in Figure219. This wizard lets you to schedule the snapshots.
11.2.15 Scheduling Snapshots You can select an existing snapshot schedule or create a new snapshot schedule for the
VD.
Follow these steps to schedule snapshots.
1. Select any one of the options shown in the Enable MegaRAID Recovery - Create
Snapshot Schedule wizard in Figure219 to schedule snapshots using the radio
button.
Figure 219: Enable MegaRAID Recovery - Create Snapshot Schedule
 Add virtual drive to the existing schedule — This option allows you to add a VD to a
pre-existing schedule already defined in the system.
The Schedule field displays the schedule details of the VD.
—The Frequency column — Displays the frequency of the daily or weekly
snapshot schedule.