Lenovo ThinkServer RD330 - Changing the Severity Level for Individual Events

Page 299
MegaRAID SAS Software User Guide Chapter 9: Monitoring System Events and Storage Devices
| Configuring Alert Notifications
Figure 182: Change Individual Events Dialog Box
3. Click an event in the list to select it.
The current alert delivery methods appear for the selected event under the Alert
Delivery Methods heading.
4. Select the desired alert delivery methods for the event.
5. Press ESC to return to the Alerts Notification Configuration screen.
6. Click OK.
This saves all of the changes made to the event.
9.2.3 Changing the Severity Level for
Individual Events
To change the event severity level for a specific event, perform the following steps:
NOTE: See Table133 for details about the severity levels.
1. On the Alerts Notification Configuration screen, click the Alerts Setting tab.
The Alerts Setting portion of the screen appears.
2. Click Change Individual Events.
The Change Individual Events dialog box appears, as shown in Figure182. The
dialog box shows the events by their ID number, description, and severity level.