Page 219
MegaRAID SAS Software User Guide Chapter 5: MegaRAID Command Tool
| Dimmer Switch-Related Options
5.22 Dimmer Switch-Related
Options
The following tables display command information about the Dimmer switch option.
5.22.1 Display Selected Adapter
Properties
Use the command in the following table to display the selected Adapter Properties.
Table 123: Displays the Selected Adapter Properties
Convention MegaCLI -AdpGetProp CacheFlushInterval
|RebuildRate|PatrolReadRate|BgiRate|CCRate|
ReconRate|SpinupDriveCount|SpinupDelay|
CoercionMode|ClusterEnable|PredFailPollInterval
|BatWarnDsbl|EccBucketSize|EccBucketLeakRate|
EccBucketCount|AbortCCOnError|AlarmDsply|
SMARTCpyBkEnbl|SSDSMARTCpyBkEnbl|NCQDsply|
MaintainPdFailHistoryEnbl|RstrHotSpareOnInsert
|DisableOCR|EnableJBOD|DsblCacheBypass|BootWithPinne
dCache|AutoEnhancedImportDsply|AutoDetectBackPlaneDs
bl|EnblSpinDownUnConfigDrvs|SpinDownTime|DefaultSnap
shotSpace|DefaultViewSpace|AutoSnapshotSpace|CopyBac
kDsbl|LoadBalanceMode|
UseFDEOnlyEncrypt|UseDiskActivityForLocate
|DefaultLdPSPolicy|DisableLdPsInterval|
DisableLdPsTime|SpinUpEncDrvCn|SpinUpEncDelay
-aN|-a0,1,2|-aALL
Description Displays selected adapter properties.
The possible settings are:
DefaultLdPSPolicy: Default LD power savings policy.
DisableLdPsInterval: LD power savings are disabled for yy hours beginning
at disableLdPSTime.
DisableLdPsTime: LD power savings shall be disabled at xx minutes from
12:00 am.
SpinUpEncDrvCnt: Maximum number of drives within an enclosure to spin
up at one time.
SpinUpEncDelay: Number of seconds to delay among spinup groups within
an enclosure.