Lenovo ThinkServer RD330 - Change Security from EKM to LKM

Page 117
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility
| Selecting SafeStore Encryption Services Security
Options
2. To change the drive security settings, select Change drive security settings... and
click Accept.
4.7.4 Change Security from EKM to
LKM
The Change Security Settings – Introduction screen appears as shown in Figure73.
Figure 73: Change Security Settings – Introduction
3. Select Change current security s ettings, and click OK, the system restart message
appears as shown in Figure71.
4. Select Switch to Local Key management (LKM) mode, the Change Security
Settings – Security Key ID screen appears as shown in Figure74.