Lenovo ThinkServer RD330 - Running a Group Consistency Check

Page 317
MegaRAID SAS Software User Guide Chapter 10: Maintaining and Managing Storage Configurations
| Running a Consistency
Check
4. Click Ok.
You can monitor the progress of the consistency check. See Section9.9, Monitoring
Rebuilds and Other Processes for more information.
10.2.3 Running a Group Consistency
Check
You can run a consistency check on multiple drives at one time. Follow these steps to
run a group consistency check.
1. Click Manage>Check Consistency.
The Group Consistency Check appears, as shown in Figure198.
Figure 198: Group Consistency Check Dialog Box
2. Check the virtual drives to run the consistency check on or click Select All to select
all of the virtual drives.
3. Click Start.
You can monitor the progress of the group consistency check. See Section9.9,
Monitoring Rebuilds and Other Processes for more information.