Lenovo ThinkServer RD330 - Page 120

Page 120
MegaRAID SAS Software User GuideChapter 4: WebBIOS Configuration Utility
| Selecting SafeStore Encryption Services Security
Options
Figure 76: Change Security Settings – Pass Phrase Screen
11. If you want to use a pass phrase, click the checkbox Use a pass phrase in addition
to the security key.
12. Enter a new pass phrase and then enter the new pass phrase again to confirm.
The pass phrase is case-sensitive. It must be between 8and 32 characters and
contain at least one number, one lowercase letter, one uppercase letter, and one
non-alphanumeric character (e.g. < > @ +). The space character is not permitted.
Non-US keyboard users must be careful not to enter DBCS characters in the pass
phrase field or security key field. Firmware works only with the ASCII character set.
13. Click Accept.
If you entered a new pass phrase, the Authenticate Drive Security Settings screen
appears.
14. On the Authenticate Drive Security Settings screen, enter the security key and click
Ok.
If you entered a new drive security key, the Authenticate Drive Security Settings
screen appears, as shown in Figure77.