Page 155
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility
| Viewing System Event Information
Figure 108: Event Information Screen
The right side of the screen is blank until you select an event to view. The First
Sequence and Last Sequence fields in the upper left of the screen show you how many
event entries are currently stored.
To view event information, follow these steps:
1. Select an Event Locale from the menu. For example, select Enclosure to view events
relating to the drive enclosure.
2. Select an Event Class: Information, Warning, Critical, Fatal, or Dead.
3. Enter a Start Sequence number, between the First Sequence and Last Sequence
numbers. The higher the number, the more recent the event.
4. Enter the Number of events of this type that you want to view, and click Go.
The first event in the sequence appears in the right panel.
5. Click Next or Prev to page forward or backward through the sequence of events.
6. If you want, select different event criteria in the left panel, and click Go again to
view a different sequence of events.
Each event entry includes a timestamp and a description to help you determine when
the event occurred and what it was.
To Next Page
Loading...
