Page 231
MegaRAID SAS Software User Guide Chapter 6: MegaRAID Storage Manager Overview and Installation
| Installing MegaRAID
Storage Manager
Figure 128: Setup Type Screen
10. Select one of the custom setup options. The options are fully explained in the
screen text.
— Select Client if you are installing MegaRAID Storage Manager software on a PC
that will be used to view and configure servers over a network. To begin
installation, click on Install on the next screen that appears.
In the Client mode of installation, MSM installs only client-related components,
such as MSM GUI, and monitor configurator.
Use this mode when you want to manage and monitor servers remotely. When
you install MSM in Client mode on a laptop or a desktop, you can log in to a
specific server by providing the IP address.
— Select Server to install only those components required for remote server
management. To begin installation, click on Install on the next screen that
appears.
— Select StandAlone if you will use MegaRAID Storage Manager software to
create and manage storage configurations on a standalone workstation. To
begin installation, click on Install on the next screen that appears.
— Select Custom if you want to specify individual program features to install.
If you select Custom, a window listing the installation features appears, as
shown in Figure129. Select the features you want on this screen.
To Next Page
Loading...
