Page 288
MegaRAID SAS Software User GuideChapter 8: Configuration
| Changing a Virtual Drive Configuration
Figure 172: Add Drive(s) to the Current Configuration Screen
5. Click the check box next to any unconfigured drives that you want to add and then
click Next.
NOTE: The drive(s) you add must have the same capacity as or greater capacity than the
drives already in the drive group, or you cannot change the RAID level.
The Summary screen appears. This screen shows the current settings and what the
settings will be after the drives are added.
Figure 173: Modify Drive Group Summary Screen
To Next Page
Loading...
