Page 291
MegaRAID SAS Software User Guide Chapter 8: Configuration
| Changing a Virtual Drive Configuration
Figure 175: Modify Drive Group Wizard
4. On the Modify Drive Group Wizard screen, select the RAID level that you want to
change ("migrate") the drive group to and click Next.
The following screen appears. The screen states the number of drives that you have
to add to change the RAID level from the current level to a new RAID level that
require more drives.
Figure 176: Add Drive(s) to the Current Configuration Screen
5. Select the unconfigured drive or drives to add and then click Next.
To Next Page
Loading...
