Lexmark MX310 - Reinstall Missing or Unresponsive Cartridge [31.Xy]; Remove Paper from Standard Output bin; Replace All Originals if Restarting Job; Replace Cartridge, 0 Estimated Pages Remain [88.Xy]

To Next Page

To Previous Page

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

• Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide.

• If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace

the toner cartridge.

Remove paper from standard output bin

Remove the paper stack from the standard bin. The printer automatically detects paper removal and

resumes printing.

If removing the paper does not clear the message, then select Continue on the printer control panel. For

non-touch-screen printer models, press

to conﬁrm.

Replace all originals if restarting job.

From the printer control panel, try one or more of the following:

• Select Cancel job to clear the message and cancel the scan job.

• Select Scan from automatic feeder to continue scanning from the ADF immediately after the last

successful scan job.

• Select Scan from ﬂatbed to continue scanning from the scanner immediately after the last successful

scan job.

• Select Finish job without further scanning to end the last successful scan job.

• Select Restart job to restart the scan job with the same settings from the previous scan job.

• For non‑touch‑screen printer models, press to conﬁrm.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the

instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s Guide.

Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s

Guide or visit

www.lexmark.com.

Replace cartridge, printer region mismatch [42.xy]

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer

region. y indicates the value of the cartridge region. x and y can have the following values:

7015

Diagnostics and troubleshooting

135

Other manuals for Lexmark MX310