5 Remove the three screws (A), and then remove the power supply shield.
A
Duplex removal
1 Remove the left cover. See “Left cover removal” on page 279.
2 Remove the rear door and cover. See “Rear exit door removal” on page 369 and “Rear cover removal”
on page 370.
3 Remove the power supply. See “Power supply removal” on page 339.
4 Remove the power supply shield. See “Power supply shield removal” on page 340.
5 Position the printer so that it sits on its right side.
7015
Parts removal
341
To Next Page
Loading...
