Restoring the printer configuration after replacing the controller board
Restore the printer to its correct configuration to complete the replacement service. Use the Service Restore
Tool to download the software bundle, and then flash the printer settings and embedded solutions.
Note: The software bundle contains the latest version of the
firmware,
applications, and software licenses
from the Lexmark Virtual Solutions Center (VSC). The printer
firmware
may be at a
dierent
level from what
was used before replacing the controller board.
Using the Service Restore Tool
1
Go to https://cdp.lexmark.com/service-restore-tool/ to access the tool.
2 Log in using your Lexmark or partner login.
If your login fails, then contact your next level of support.
3 Enter the printer serial number, and then submit the information.
Note: Make sure that the serial number that appears on the
verification
screen is correct.
4 Save the zip file.
7015
Parts removal
257
To Next Page
Loading...
