8 Remove the E-clip (E), and then remove the MPF sector gear (F).
EF
Reverse solenoid removal
1 Remove the right cover. See “Right cover removal” on page 294.
2 Remove the left cover. See “Left cover removal” on page 279.
3 Remove the rear door and cover. See “Rear exit door removal” on page 369 and “Rear cover removal”
on page 370.
4 Remove the scanner assembly. See “Scanner assembly removal” on page 390.
5 Remove the top cover. See “Top cover assembly removal” on page 377.
6 Remove the cooling fan. See “Cooling fan removal” on page 298.
7 Disconnect cable J10 from the controller board.
7015
Parts removal
288
To Next Page
Loading...
