Lexmark MX310 - Fax Specifications; Enabling the Security Reset Jumper

Duplex ADF 220,000 pages
Fax specifications
Modem speed 33.6 Kbps
Transmission speed 3 seconds/page
Maximum resolution 300 x 300 dpi
Color fax Supported—send only
Fax memory 320 pages per 6 MB
Compression methods JBIG2, MR, MMR, MHE, JPEG
Fax server Supported
PC fax Supported—send and receive
Speed dial locations 999
Broadcast locations 12
Distinctive ring Supported
Secure fax Supported
Other functions supported Fax scheduling, fax forwarding, junk fax block, manual
fax
Enabling the security reset jumper
The security reset jumper can reset a printer that is locked due to a forgotten password or lost network
connectivity.
Notes:
• Resetting the printer deletes all security settings.
• Before changing the security settings, ask for permission from your administrator.
1 Turn o the printer.
2 Access the controller board.
3 Move the jumper to cover the middle and exposed prongs.
Note: The small yellow jumper is located beside a lock icon on the controller board.
4 Turn on the printer.
Invalidating the eects of a jumper reset
1 From the Embedded Web Server, click Settings > Security > Miscellaneous Security Settings.
2 From the Security Reset Jumper menu, select No
Eect
.
Warning: This setting disables access to the security menus of a locked printer. To regain access to the
menus, replace the controller board.
7015
Printer specifications
466