Lexmark MX310 - [X]-Page Jam, Open Automatic Feeder Top Cover. [28 Y.XX]

3 Reload paper into the multipurpose feeder.
Note: Make sure the paper guide lightly rests against the edge of the paper.
4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen
printer models, select Next >
> Clear the jam, press OK > .
[x]‑page jam, open automatic feeder top cover. [28y.xx]
1 Remove all original documents from the ADF tray.
Note: The message is cleared when the pages are removed from the ADF tray.
2 Open the ADF cover.
3 Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4 Close the ADF cover.
5 Straighten the edges of the original documents, then load the original documents into the ADF, and then
adjust the paper guide.
6 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen
printer models, select Next >
> Clear the jam, press OK > .
7015
Diagnostics and troubleshooting
97