Lexmark MX310 - Change History

Change history
Change history
October 3, 2018
• Updated the redrive assembly removal topic in the parts removals chapter.
July 12, 2018
• For Performing the initial troubleshooting check, relative humidity values were updated (now 8 to 80%).
• A note for ambient temperature and relative humidity information was added to the Fuser service check.
May 16, 2018
• Updated step 7 of the reverse solenoid removal in the parts removal chapter to disconnect J10 instead of
JDSOL1.
• Corrected the wiring diagram with the following:
– J10 is now connected to the reverse solenoid.
– JCVR1 is now connected to the front cover sensor.
May 3, 2018
• Updated the 24x error code tables in the Diagnostics and troubleshooting chapter.
• Added the 24x.06 service check topic in the Diagnostics and troubleshooting chapter.
March 9, 2018
• Updated the ADF service check and the Main drive gearbox service check under the Diagnostics and
troubleshooting chapter.
• Added PN 40X8050 for the bin full sensor with actuator and static brush under Electronics 1 (MX31x, MX41x,
and XM1140) and Electronics 1 (MX51x and XM1145) in the parts catalog chapter.
January 9, 2018
• Updated the graphic for PN 40X9119 to remove the flag for the bin full sensor in the Electronics 1 (MX31x,
MX41x, and XM1140) and Electronics 1 (MX51x and XM1145) in the parts catalog chapter.
December 19, 2017
• Updated the graphic for PN 40X9131 and PN 40X8302 to include the MPF links in the assembly.
• Added PN 41X2300 for the access cover link under the Covers assembly in the Parts Catalog chapter.
• Added PN 40X9939 and PN 41X1946 under Miscellaneous in the Parts Catalog chapter.
August 25, 2017
• Updated “Blank pages check” on page 49.
• Updated “Solid black pages check” on page 62.
May 31, 2017
• Updated 40X4827 to 40X9652 in the topic “Miscellaneous” in the “Parts catalog” chapter.
7015
Change history
25