Note: Make sure that the serial number in the zip file matches the serial number of the printer being
restored.
5 Extract the contents of the zip file, open the Readme file, and then follow the instructions in the file.
Notes:
• Perform the install instructions on the Readme
file
in the exact order shown. Only restart the printer
when instructed to in the file.
• For more information on how to flash the downloaded files, see “Updating the printer firmware ” on
page 260.
• To load the z ip
files
that are extracted from the Service Restore Tool, see “Restoring solutions,
licenses, and configuration settings” on page 259.
6 After performing the installation instructions in the Readme file, confirm from the customer if all the eSF
apps have been installed.
7015
Parts removal
258
To Next Page
Loading...
