July 1, 2013
• FRU description changed—40X8297, Pick tire (MX51x and XM1145)
• FRU added—40X8296, Pick tire (MX31x, MX41x and XM1140)
June 19, 2013
• Changes were made to the ADF paper jam service check.
• Part number 40X8093 (Transfer roll) was changed to 40X8393.
• BSD model information was added to the FRU tables on the parts catalog.
• Some information from the error code tables were made into new service checks. The following are the
new service check topics added:
– ADF rattling noise service check
– Imaging unit low service check
– Toner cartridge low service check
– Bin full service check
– Toner smart chip compatibility service check
– Imaging chip compatibility service check
– Flash full service check
– Maintenance kit service check
– NVRAM cyclic redundancy service check
– Invalid
firmware/controller
board service check
– RAM memory error service check
– Scanner configuration error service check
– Blank spaces on incoming fax service check
– Stretched words on incoming fax service check
– Download emulation cyclic redundancy service check
April 24, 2013
• For the Imaging parts catalog assembly, the descriptions for the following part numbers were revised:
40X9142, 40X9143, 40X9144, 40X9093, 40X9059, 40X9057
April 4, 2013
• Updated the ACM assembly removal procedure.
• Added Media sensor flag removal procedure.
• Updated the Sensor (input) early/late arriving service check to include checking of the media present sensor
flag.
• Added media present sensor flag part number 40X8800 to the Electronics 2 parts catalog assembly.
February 4, 2013
• 10.xx and 24x.08 errors were added to the User attendance messages table.
• 24x.08 errors were added to the 24x paper jams and Input option jam error messages tables.
• New topic for updating the firmware was added to the Service menus chapter.
• BSD machines were added to the list of models under the General information chapter.
7015
Change history
32
To Next Page
Loading...
