Lexmark MX310 - Page 492

Close door 126
Close flatbed cover and load originals if restarting
job [2yy.xx] 126
Complex page, some data may not have printed
[39] 127
Configuration change, some held jobs were not
restored [57] 127
Defective flash detected [51] 127
Disk must be formatted for use in this device 127
Error reading USB drive. Remove USB. 127
Error reading USB hub. Remove hub. 127
Fax partition inoperative. Contact system
administrator. 128
Fax server 'To Format' not set up. Contact system
administrator. 128
Fax Station Name not set up. Contact system
administrator. 128
Fax Station Number not set up. Contact system
administrator. 128
Imaging unit low [84.xy] 128
Imaging unit nearly low [84.xy] 128
Imaging unit very low, [x] estimated pages remain
[84.xy] 129
Incorrect paper size, open [paper source] [34] 129
Insucient memory for Flash Memory Defragment
operation [37] 129
Insucient memory to collate job [37] 130
Insucient memory to support Resource Save
feature [35] 130
Insucient memory, some Held Jobs were
deleted [37] 129
Insucient memory, some held jobs will not be
restored [37] 129
Load [paper source] with [custom string] [paper
orientation] 131
Load [paper source] with [custom type name]
[paper orientation] 131
Load [paper source] with [paper size] [paper
orientation] 132
Load [paper source] with [paper type] [paper size]
[paper orientation] 132
Load manual feeder with [custom string] [paper
orientation] 130
Load manual feeder with [custom type name]
[paper orientation] 130
Load manual feeder with [paper size] [paper
orientation] 130
Load manual feeder with [paper type] [paper size]
[paper orientation] 131
Maintenance kit low [80.xy] 132
Maintenance kit nearly low [80.xy] 132
Maintenance kit very low, [x] estimated pages
remain [80.xy] 132
Memory full [38] 133
Memory full, cannot print faxes 133
Memory full, cannot send faxes 133
Network [x] software error [54] 133
No analog phone line connected to modem, fax is
disabled. 133
Non‑Lexmark [supply type], see User’s Guide
[33.xy] 133
Not enough free space in flash memory for
resources [52] 134
Printer had to restart. Last job may be
incomplete. 134
Reinstall defective cartridge [31.xy] 134
Reinstall missing or unresponsive cartridge
[31.xy] 135
Reinstall missing or unresponsive imaging unit
[31.xy] 137
Remove paper from standard output bin 135
Replace all originals if restarting job. 135
Replace cartridge, 0 estimated pages remain
[88.xy] 135
Replace cartridge, printer region mismatch
[42.xy] 135
Replace defective imaging unit [31.xy] 136
Replace imaging unit, 0 estimated pages remain
[84.xy] 136
Replace jammed originals if restarting job. 136
Replace maintenance kit, 0 estimated pages
remain [80.xy] 137
Replace unsupported cartridge [32.xy] 137
Replace unsupported imaging unit [32.xy] 137
Restore held jobs? 137
Scanner automatic feeder cover open 137
Scanner disabled by admin [840.01] 138
Scanner disabled. Contact system administrator if
problem persists. [840.02] 138
Scanner jam, remove all originals from the
scanner [2yy.xx] 138
Scanner jam, remove jammed originals from the
scanner [2yy.xx] 138
Serial option [x] error [54] 138
SMTP server not set up. Contact system
administrator. 138, 140
Some held jobs were not restored 138
Standard network software error [54] 139
Standard USB port disabled [56] 139
Supply needed to complete job 139
Too many flash options installed [58] 139
Too many trays attached [58] 139
Unformatted flash detected [53] 140
7015
Index
492