Linksys SPA9000

Linksys Voice System Administration Guide 102
Configuring a Streaming Audio Server
Configuring Music on Hold
5. Configure each phone to use this audio source as the MOH server:
a. Click the PBX Status link to view the list of phones.
b. In the list, find the phone that you want to configure, and then click the hyperlink in the
IP Address column. The Telephone Configuration page appears in a separate window.
c. Click the Ext 1 tab.
d. Scroll down to the Call Feature Settings section.
e. In the MOH Server field, enter the extension number that you assigned to the FXS port
for the streaming audio server.
f. Click Submit All Changes.
g. Close the window for the Telephone Configuration page.
h. Repeat this step to configure each phone, as needed.