Linksys Voice System Administration Guide 24
Connecting to the SPA9000 Administration Web Server
Basic Administration of the SPA9000
a. Connect to the SPA9000 administration web server, and choose Admin access with
Advanced settings. (See ”Connecting to the SPA9000 Administration Web Server,” on
page 24).
b. Review the Router > Status page. The Software Version field should show the firmware
version that you installed.
NOTE: You may need to refresh your browser to display the updated page reflecting the
new version number.
Connecting to the SPA9000 Administration Web Server
To connect to the SPA9000 administration web server, perform the following steps.
1. Start Internet Explorer on any computer that is connected to the same network as the
SPA9000.
NOTE: You should have previously connected and configured the SPA9000 as described in
the LVS Installation Guide.
2. Enter the IP address of the SPA9000.
NOTE: You can find the IP address of the SPA9000 by connecting an analog telephone to
the Phone 1 or Phone 2 port on the SPA9000. Then lift the receiver of the phone and press
**** on the keypad to access the IVR menu. Press 110# to hear the IP address.
3. To view administrative features, click Admin Login and then click Advanced.
NOTE: By default, no password is required. For more information, see ”Setting Passwords for
User and Administrator Accounts,” on page 25.
ALTERNATIVELY: After starting Internet Explorer, enter: <SPA9000_ipaddress>/admin/
advanced
Saving or Discarding Changes SPA9000
Changes can be saved or discarded at any time.
• Changes are submitted only when you click the Submit All Changes button at the bottom
of a page. When changes are saved, the SPA9000 may reboot, depending on the type of
changes.
• To discard unsubmitted changes, click the Undo All Changes button at the bottom of the
page.
• Unsubmitted changes are retained when you move among the pages within the Voice
module or the Router module. This feature allows you to make changes on various pages
within a module before clicking Submit All Changes.
• Unsubmitted changes are discarded when you switch between the Router and Voice tabs,
between the User and Administrator accounts, or between the Basic and Advanced views.
To Next Page
Loading...
Need help?
Physical Interfaces
Power
