Linksys Voice System Administration Guide 212
Event Logs
Event Logs
This section describes the fields on the SetLog Level page.
Event Logs tab
Set Log Level
SPA400 logs significant events onto its internal buffer. For each log type, you can choose to
include Fatal Errors, Errors, Events, or All Information. Another option is OFF, meaning that no
information is collected for the selected log type.
Tone
FXO Line status
Hook Status
Line status (1-4) The status of each line port:
• On-Hook indicates that the FXO port is not in use.
• Off-Hook indicates that a call is in progress.
Battery Level
Line (1-4) The currently voltage on the line port, if the port is connected to a
PSTN line; for example, a connected line could show -51 V
Event Log Level
Telephony Log level for telephony events
SIP Log level for SIP events
DSP Log level for DSP events
Dial plan Log level for dial plan events
Voice mail Log level for voice mail events
Others Log level for all other events
Call process tone configuration
Tone on fraction The duty cycle of the CP tone to be detected
High cutoff frequency The highest frequency of a valid CP tone
Low cutoff frequency The lowest frequency of a valid CP tone
To Next Page
Loading...
