EasyManua.ls Logo

Linksys SPA9000

Linksys SPA9000
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Linksys Voice System Administration Guide 203
C
Setup
SPA400 Field Reference
This appendix describes the fields on each page of thes of the SPA400 administration web
server.
”Setup,” on page 203
Administration,” on page 209
”Status,” on page 211
”Event Logs,” on page 212
Setup
This section describes the fields on the following pages within the Setup module:
”Basic Setup,” on page 203
”SPA9000 Interface,” on page 204
”Voice, on page 205
Voicemail Server,” on page 208
Voicemail Users,” on page 209
Setup tab
Basic Setup
Network Setup
Dynamic IP Address (DHCP
Client)
Select this button to obtain an IP address through DHCP. Fixed IP
address is the recommended setting.
Default setting: Dynamic IP Address
Fixed IP Address Select this button to assign a static IP address to the SPA400. This is the
recommended configuration.
IP Subnet Mask Subnet mask
Gateway IP Address IP address of the Gateway/Router
Domain Name Server (DNS) Address
Primary DNS IP address of the primary domain name server
Secondary DNS IP address of the secondary domain name server

Table of Contents

Other manuals for Linksys SPA9000

Related product manuals