Linksys Voice System Administration Guide 118
8
Requirements for Localization
Localization
Localization
You can localize your LVS with the language files, tones, and ring patterns that are appropriate
for your region.
• ”Requirements for Localization,” on page 118
• ”Localizing the SPA9000 Auto Attendant Prompts,” on page 118
• ”Local Time Configuration,” on page 120
• ”Configuring the SPA9000 and SPA9xx Call Progress Tones,” on page 120
• ”Localizing the SPA400 Voice Mail Prompts,” on page 125
• ”Localizing the SPA400 Call Disconnect Tones,” on page 126
• ”Localizing the SPA400 Caller ID Method,” on page 128
Note For instructions about localizing the phone display, see the Linksys
Phone Administration Guide, which is available at www.linksys.com.
Requirements for Localization
You need TFTP server software to localize the SPA9000.
Localizing the SPA9000 Auto Attendant Prompts
The default Auto Attendant prompts are in English. You can localize your system by
downloading and installing the appropriate language files for your region. Store these prompts
on a TFTP/HTTP/HTTPS server, and the SPA9000 will download the files at the device boot up
time.
The set of files includes the following types of prompts:
• Prompt 1: Greets the caller and prompts for an extension number
• Prompt 2: Notifies the caller that the call is being forwarded
• Prompt 3: Notifies the caller of an invalid extension
• Prompt 4: Good-bye
• Prompt 5: Greets the caller with specific prompts for General Information, Sales, and
Support.
• Prompt 6: Notifies the caller that the office is currently closed and prompts for an
extension number.
To Next Page
Loading...
Need help?
Physical Interfaces
Power
