Linksys SPA9000

Linksys Voice System Administration Guide 84
Upgrading the Firmware for the SPA400
Administering the SPA400 and Voice Mail Service
Upgrading the Firmware for the SPA400
As needed, you can download new firmware from Linksys.com and then install the firmware on
the SPA400.
1. Connect to the SPA400 administration web server. (See ”Connecting to the SPA400
Administration Web Server,” on page 80.)
2. Click Administration tab > Firmware Upgrade.
3. Click Browse.
SPA400 Administration > Firmware Upgrade
4. Find the binary (.bin file) that you extracted to your Desktop, and click Open. The selected
file appears in the File Path field on the Firmware Upgrade page.
5. Click Upgrade.
6. When the confirmation message appears, click OK.
7. When the Setup page reappears, verify that the Firmware Version number matches the
firmware version that you installed. You have successfully upgraded the firmware.
SPA400 Main Page: Firmware Version
NOTE: You may need to refresh your browser to display the updated banner reflecting the
new version number.