Linksys Voice System Administration Guide 157
Voice tab
Voice tab > Info page >
Product Information section
Voice tab > Info page >
System Status section
Voice tab > Info page >
FXS 1/2 Status section
Product Name The model number of the SPA9000
Serial Number The serial number of the SPA9000
Software Version The version number of the SPA9000 software
Hardware Version The version number of the SPA9000 hardware
MAC Address The MAC address of the SPA9000
Client Certificate The status of the client certificate, which authenticates the SPA9000 for
use in the ITSP network
Customization For an remote configuration (RC) unit, this field indicates whether the
unit has been customized or not. Pending indicates a new RC unit that is
ready for provisioning. If the unit has already retrieved its customized
profile, this field displays the name of the company that provisioned the
unit.
Licenses When populated with the value K0, indicates that the SPA9000 is
licensed for up to 16 users; if this field is blank, install firmware version
5.2.5 or higher.
Current Time The current date and time of the system; for example, 10/3/2003
16:43:00
Elapsed Time The total time elapsed since the last reboot of the system; for example,
25 days and 18:12:36
Hook State The readiness of the device that is connected to the corresponding
Phone port on the SPA9000
•On: Ready for use
•Off: In use
Message Waiting Indicates whether the station assigned to the FXS port has new
voicemail waiting: Yes or No
Call Back Active Indicates whether a call back request is in progress: Yes or No
Last Called Number Last number called
Last Caller Number Number of the last caller if available from caller ID, example 4085551212
Call 1/2 State Status of the call:, Ringing, Idle, or Connected
Call 1/2 Tone Type of tone used by the call, for example Ring Back 2 for inbound call or
None for outbound call
Call 1/2 Encoder Codec used for encoding
Call 1/2 Decoder Codec used for decoding
To Next Page
Loading...
Need help?
Physical Interfaces
Power
