EasyManuals Logo

Linksys SPA9000 Administration Guide

Linksys SPA9000
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #213 background imageLoading...
Page #213 background image
Linksys Voice System Administration Guide 211
Status
Status
Status tab
Gateway
Note This page is read only. No changes can be made.
Gateway Information
Firmware Version The firmware version that is installed on this device
Build Date The date when the firmware was last updated
MAC Address The MAC address of this device
Current Time The current date and time
System Up Time The length of time that the system has been operating, in days, hours,
and minutes
Internet Connection
IP Addres The IP address of this device
IP Subnet Mask The subnet mask for this subnet
Gateway IP Address The IP address of the gateway device
Primary DNS The primary DNS server
Secondary DNS The secondary DNS server
SPA400 Status
USB status The status of the USB storage device: mount (file system mounted and
available) or unmount
Voice mail status The status of the voice mail service; OK indicates that voice mail service
is enabled
USB capacity status The amount of storage space that is currently in use, and the amount
that is remaining, example: Used 5712KB, remaining 119960KB
SIP registration status The status of the SIP registration; Registered indicates that the SPA9000
is registered to the SPA400

Table of Contents

Other manuals for Linksys SPA9000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys SPA9000 and is the answer not in the manual?

Linksys SPA9000 Specifications

Physical Interfaces IconPhysical Interfaces
Ethernet ports2 10/100BaseT RJ-45
Phone ports2 RJ-11 FXS
Ring voltage40-55 VRMS
Ring frequency10 Hz - 40 Hz
Maximum ringer load3 REN
Power IconPower
On-hook voltage-50 V NOMINAL
Off-hook current25 mA min
Terminating impedanceConfigurable, including 600 ohms

Related product manuals