Linksys Voice System Administration Guide 25
Access Levels
Basic Administration of the SPA9000
Access Levels
You can use the SPA9000 administration web server to configure and manage your system.
Three levels of access are available:
• User Level: The User account only has the privilege to access part of the web profile
parameters.
• Administrator Level: The Administrator account has the privilege to modify all the web
profile parameters and can also modify the passwords of both Administrator and User
account.
• Advanced: Administrators and Users can view advanced features by clicking the
Advanced link in the top right corner or lower left corner of the menu bar.
By default, no passwords are assigned for either the Administrator account or the User account.
If the password has been set for the Administrator account, the browser prompts for
authentication.
You can switch from User access to Administrator access by clicking the Admin Login link.
Likewise, you can switch from Administrator access to User access by clicking the User Login
link. If a password is set, you will be prompted to enter the password after you click the link.
Setting Passwords for User and Administrator Accounts
The Administrator account name for the SPA9000 is admin (with a lower-case a) and the User
account name is user. These account names cannot be changed.
Note The system prompts for an Administrator account password only if a
password has been set. By default, there is no password. You should set
a password to protect your SPA9000 from unauthorized access.
TIP: Before you make changes, it is recommended
that you save a copy of your current working
configuration:
1. In Internet Explorer, connect to the
administration web server.
2. From the menu, choose File > Save As.
3. Save the configuration as Web Page Complete.
You can use the saved file to review the saved
settings in all pages of the administrative GUI.
NOTE: To save a Telephone Configuration, first
enter the IP address for the configuration, and
then follow the above procedure.
To Next Page
Loading...
Need help?
Physical Interfaces
Power
