Linksys Voice System Administration Guide 120
Local Time Configuration
Localization
4. Click Submit All Changes.
The prompts are downloaded when the SPA9000 boots up. If a prompt has already been
downloaded from the given URL, the download is not performed.
5. To verify that the prompts are localized, make a call to the Auto Attendant. From an internal
phone, you can press the Setup button, then press 1 - Directory, then 2 - Corporate
Directory, and then scroll down to find and select the number for the Auto Attendant.
Local Time Configuration
You will need to localize the date, time, and daylight saving time rule. See ”Setting the Date and
Time,” on page 27 and ”Configuring Daylight Saving Time,” on page 27. Use the following table
to find the correct Daylight Saving Time Rules for EMEA and Australia.
Configuring the SPA9000 and SPA9xx Call Progress Tones
Call progress tones, such as dial tone and reorder, indicate the call progress to the users. You
can configure your SPA9000 and your SPA9xx phones to use the appropriate call progress tones
for your region.
1. Localize the tones for the SPA9000:
a. Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login
and then click Advanced.Connect to the SPA9000 administration web server, and
choose Admin access with Advanced settings. (See ”Connecting to the SPA9000
Administration Web Server,” on page 24).
b. Click Voice tab > Regional.
c. In the Call Progress Tones section, enter the values from Table 3-1 into the corresponding
fields.
d. Click Submit All Changes.
2. Localize the tones for the phones:
Country Daylight Saving Time Rule Time Zone
Australia (ACST) start=4/1/7/3;end=10/1/7/2;save=-1 GMT+10:30
Australia (AEST) start=4/1/7/3;end=10/1/7/2;save=-1 GMT+11
Australia (AWST) start=3/-1/7/3;end=10/-1/7/2;save=¬1 GMT+09:00
France start=3/-1/7/2;end=10/-1/7/2;save=1 GMT+1
Germany start=3/-1/7/2;end=10/-1/7/2;save=1 GMT+1
Spain start=3/-1/7/2;end=10/-1/7/2;save=1 GMT+1
UK/Ireland start=3/-1/7/2;end=10/-1/7/2;save=1 GMT