Linksys SPA9000 Administration Guide

Linksys Voice System Administration Guide 106
Working with the Auto Attendant Greetings
Configuring the LVS Auto-Attendant
Example Prompts
In this example, the business will have different Auto Attendant Scripts for different times of
day.
For examples of AA scripts that use custom prompts, see ”An Introduction to XML Scripting
Grammar in AA Script Examples,” on page 109.
Prompt ID Message
Prompt1 “If you know your party’s extension, you may enter it now.”
Prompt2 “Your call has been forwarded.”
Prompt3 “Not a valid extension, please try again.”
Prompt4 “Goodbye.”
Prompt5 “Welcome to All Seasons Travel.”
Prompt6 “Thank you for calling All Seasons Travel. Presently we are closed.”
Prompt7 “We are open Monday through Friday 9 AM to 6 PM, and we are
closed on Saturdays and Sundays. Our address is 101 Main Street,
Anytown, Anystate, USA.”
Prompt8 “If you know your party’s three-digit extension, you may enter it
now.”
Prompt9 “To reach our receptionist, press 0 at any time. For our company
location, press 1. For travel support, press 2. For sales, press 3.
Otherwise, please stay on the line for our receptionist.”
Prompt10 “Welcome to the All Seasons Travel support line. If this is regarding
our Holiday Getaway Special, please press 1; otherwise, please stay
on the line for one of our travel associates. Or press * to go back.”

Linksys SPA9000 Specifications

Physical Interfaces

Ethernet ports	2 10/100BaseT RJ-45
Phone ports	2 RJ-11 FXS
Ring voltage	40-55 VRMS
Ring frequency	10 Hz - 40 Hz
Maximum ringer load	3 REN

Power

On-hook voltage	-50 V NOMINAL
Off-hook current	25 mA min
Terminating impedance	Configurable, including 600 ohms