Linksys SPA9000 Administration Guide

Linksys Voice System Administration Guide 138
Advanced Call Control and Routing
SPA9000 Voice > Regional: Vertical Service Activation Codes, Announcement Codes
4. Edit the codes, as needed.
5. If desired, enter referral services and feature call services codes. For more information, see
Appendix B, "SPA9000 Field Reference," ”Regional page” section on page 176.
Note The * codes should not conflict with any of the other vertical service
codes internally processed by the SPA9000. You can empty the
corresponding *code that you do not want to SPA9000 to process.
6. Click Submit All Changes. For more information about each field, see ”Vertical Service
Activation Codes section,” on page 181.

Linksys SPA9000 Specifications

Physical Interfaces

Ethernet ports	2 10/100BaseT RJ-45
Phone ports	2 RJ-11 FXS
Ring voltage	40-55 VRMS
Ring frequency	10 Hz - 40 Hz
Maximum ringer load	3 REN

Power

On-hook voltage	-50 V NOMINAL
Off-hook current	25 mA min
Terminating impedance	Configurable, including 600 ohms