Linksys SPA9000

Linksys Voice System Administration Guide 201
Line 1/2/3/4 page
Proxy Fallback Intvl This parameter sets the delay (sec) after which the SPA9000 will retry
from the highest priority proxy (or outbound proxy) servers after it has
failed over to a lower priority server. This parameter is useful only if the
primary and backup proxy server list is provided to the SPA9000 via DNS
SRV record lookup on the server name. (Using multiple DNS A record per
server name does not allow the notion of priority and so all hosts are
considered at the same priority and the SPA9000 will not attempt to fall
back after a fail over).
Default: 3600
Proxy Redundancy Method SPA9000 will make an internal list of proxies returned in DNS SRV
records. In normal mode, this list will contain proxies ranked by weight
and priority.
If based on SRV, the port is configured, the SPA9000 does normal first
and also inspects the port number based on 1
st
proxy’s port in the list.
Default: Normal
Mailbox Status The status of the connection to the voice mail server
Mailbox status for all the mailboxes associated with this line interface.
The status is automatically updated when the SPA9000 receives
voicemail status notification from the ITSP.
Format: [mbs[,mbs[,mbs[,…]]]] where:
mbs = mbid:new/old
mbid = mailbox ID, such as 12345
new = number of new messages in mailbox: 0,1,2,…
old = number of old messages in mailbox: 0, 1, 2, …
Mailbox Subscribe URL Note: This parameter allows $USER and $PROXY macros, such as
$USER@$PROXY
Mailbox Deposit URL This parameter allows $USER, $PROXY, and $MBID macros, such as
$USER@$PROXY, or $MBID@$PROXY.
Default: blank
Mailbox Subscribe Expires Identifies when the mailbox subscription expires.
Recommended: 30
Mailbox Manage URL This parameter allows $USER, $PROXY, and $MBID macros, such as
$USER@$PROXY, or $MBID@$PROXY.
Default: blank