Lucent Technologies DDM-2000 OC-3 User Manual

IXL-001: Operation and Maintenance 363-206-285
Page 18 of 18 Issue 3, June 2001
DDM-2000 OC-3 MULTIPLEXER
Integrated Transport Management
(ITM) SubNetwork Controller
(SNC)
ITM SNC is an element management system that supports SONET NEs such as the
Lucent Technologies' DDM-2000, FT-2000, SLC
®
-2000, and the Fujitsu
†
Lightwave
Multiplexer (FLM), ITM SNC provides fault, provisioning, configuration, and security
management functions via a Graphical User Interface (GUI). Through these
functions, ITM SNC a able to support communication multiplexing or concentration, to
provide network security, and to record all database changes. ITM SNC also
provides a cut-through capability, allowing the ITM SNC user to access an NE
through its native command set.
ITM SNC operates as an enchanced graphical tool and as a general configuration
management aid. It provides NE, port, cross-connection, and path provisioning, as
well as flowthrough from provisioning operations systems (OSs) to NEs. ITM SNC
also provides fault management through subnetwork alarm and event preprocessing
prior to sending fault information to a network surveillance system such as the
Network Monitoring and Analysis-Facility (NMA-F). For more information, see
107-564-2xx (release dependent), Integrated Transport Management (ITM)
SubNetwork Controller (SNC), User Guide and 107-564-2xx (release dependent),
Integrated Transport Management SubNetwork Controller, System Administration
Guide .
† Registered trademark of Fujitsu Limited.

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English