Lucent Technologies DDM-2000 OC-3 - Page 1366

IXL-001: System Turnup/Circuit Order 363-206-285
Page 6 of 44 Issue 3, June 2001
DDM-2000 OC-3 MULTIPLEXER
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
Service — Discontinue DS1
DiscontinueDS1Service............................ CircuitOrder: NTP-011
Service — Discontinue DS3
DiscontinueDS3Service............................ CircuitOrder: NTP-012
Service — Discontinue EC-1 Interface
DiscontinueEC-1Service........................... CircuitOrder: NTP-036
Service — Discontinue HDSL Interface
DiscontinueEnd-to-EndHDSLService................. CircuitOrder: NTP-017
Service — Discontinue LAN Interface
DiscontinueEnd-to-EndLANService.................. CircuitOrder: NTP-032
Service — Discontinue T1 Interface
DiscontinueEnd-to-EndT1Service.................... CircuitOrder: NTP-052
Shelf (Node) — Discontinue
Discontinue an OC-3 or OC-12 Shelf (Node) —
FromPathSwitchedRing........................... CircuitOrder: NTP-027
Span — Discontinue OC-3 Optical
Discontinue an OC-3 Optical Span Extension —
FromDDM-2000OC-3Ring......................... CircuitOrder: NTP-019
Telemetry — Establish
EstablishTL1/X.25Telemetry ...............DetailedLevelProcedure: DLP-538
Upgrades
Upgrade DDM-2000 OC-3/FT-2000 Dual Ring
Interworking Network from EC-1 to OC-3 —
InService.......................................SystemTurnup: NTP-042
NTP-011
NTP-012
NTP-036
NTP-017
NTP-032
NTP-052
NTP-027
NTP-019
DLP-538
NTP-042