Lucent Technologies DDM-2000 OC-3 - Page 1367

363-206-285 System Turnup/Circuit Order: IXL-001
Issue 3, June 2001 Page 7 of 44
DDM-2000 OC-3 MULTIPLEXER
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
Upgrade DDM-2000 OC-3/OC-12 Dual Ring
Interworking Network from EC-1 to OC-3/IS-3 —
InService ........................................CircuitOrder: NTP-051
Upgrade DDM-2000 OC-3 Ring Network to
OC-12 Ring Network Using OC-3 Shelves —
InService ........................................CircuitOrder: NTP-023
Upgrade DDM-2000 OC-3 Ring Network to
OC-12 Ring Network Using OC-3/OC-12 Shelves —
InService ........................................CircuitOrder: NTP-024
Upgrade DDM-2000 OC-12 Ring by Removing
OC-12 Shelf and Replacing with Existing
Single-Homed OC-3 Shelf —
InService ........................................CircuitOrder: NTP-025
Upgrade DDM-2000 OC-12 Ring Network Using
24-Type OLIUs to OC-12 Ring Network
Using 29-Type OLIUs—
InService ........................................CircuitOrder: NTP-058
Upgrade DDM-2000 OC-3 System —
Linear Add/Drop to Path Switched Ring
InService ........................................CircuitOrder: NTP-039
Upgrade DDM-2000 OC-3 System —
Point-to-Point to Path Switched Ring
InService ........................................CircuitOrder: NTP-029
Upgrade DDM-2000 OC-3 System —
Point-to-Point to Path Switched Ring
OutofService.....................................CircuitOrder: NTP-030
Upgrade DDM-2000 OC-3 System —
Release 7.1 or 7.2 to TARP Release 13 or 15
SystemInService................................SystemTurnup: NTP-046
Upgrade Software Program —
In-Service System
LocalShelfDownload.....................DetailedLevelProcedure: DLP-532
Upgrade Software Program —
In-Service System
RemoteShelfDownload...................DetailedLevelProcedure: DLP-562
UpgradeTiming.........................DetailedLevelProcedures: DLP-535
NTP-051
NTP-023
NTP-024
NTP-025
NTP-058
NTP-039
NTP-029
NTP-030
NTP-046
DLP-532
DLP-562
DLP-535