DLP-532: Detailed Level Procedure 363-206-285
Page 9 of 14 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
15. Was response correct?
If YES, then continue with Step 16.
If NO, then do Trouble Clearing: TAP-116.
16. Enter a y or yes and a carriage return to execute the program. Software
download may take 20 to 45 minutes.
Response: ABN LED lights on User Panel and a "P" is displayed in
SYSCTL FE ID display in the shelf receiving the program.
PC starts download and prints the following message:
Searching for optimal transfer rate.
Handshake established at <baudrate> baud.
In progress....
The dots continue to print until program installation is
complete. If floppy disks are being used, insert each
diskette when prompted. After installation is completed,
the PC prints the following completion message:
ins-prog:TID COMPLD
/* Generic a.b.c is installed */
17. Was response correct?
If YES, then continue with Step 18.
If NO, then do Trouble Clearing: TAP-116.
18. Did the letter "C" appear in the FE ID display?
If NO, then proceed to Step 33.
If YES, then proceed to Step 23.
TAP-116
To Next Page
Loading...
Need help?
General
