DLP-541: Detailed Level Procedure 363-206-285
Page 6 of 8 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
NOTE:
Passwords are not displayed on the CIT.
At the password< prompt, enter a valid password (provided by your
DDM-2000 administrator).
Response: CIT prints the following message followed by an alarm
and status report:
/*************************************
**
* Lucent Technologies *
* DDM-2000 OC-3 Multiplexer *
**
* Release a.b.c *
**
*************************************/
.
.
.
TID date time
M rtrv-alm:all COMPLD
/* Active Alarms and Status Report