DLP-541: Detailed Level Procedure 363-206-285
Page 8 of 8 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
18.
NOTE:
The rtrv-lgn: command retrieves the Login Provisioning
Report. This report lists each user’s login and authorization level (user
type). The report does not contain passwords. See the Commands and
Reports section of this manual for a description of the rtrv-lgn:
command format.
Use the rtrv-lgn: command to obtain the Login Provisioning
Report and verify the user logins and user types.
19.
NOTE:
Setting logins/passwords does not set system security. In addition to
assigning valid logins/passwords, CIT and/or DCC port security must be
enabled to secure a system.
Repeat this procedure to enable system security, if required.
20. See the Commands and Reports section of this manual for descriptions of
related security commands: set-passwd:, rtrv-lgn:,and rtrv-secu:.
21. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
To Next Page
Loading...
Need help?
General
