DLP-555: Detailed Level Procedure 363-206-285
Page 3 of 6 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
16. Reinstall SYSCTL and OHCTL.
17. You can safely remove one fuse as required, if power is maintained to the shelf
through the other fuse.
18. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
19. Trouble in User Panel, power feeder(s), or office battery distribution. If you
need assistance, notify your supervisor, your local technical support
organization, or call Lucent Technologies RTAC, per local operating
instructions. If User Panel needs to be replaced, see DLP-551.
20. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
DLP-551
To Next Page
Loading...