Lucent Technologies DDM-2000 OC-3 User Manual

363-206-285
Administration and Provisioning
8-74 Issue 3 June 2001
Notes:
VC ckt. type X.25 attach. ††
SNPA: LCN for PVCs
or DTE address for SVC ††
OS type (ACID) ††
PVC, SVC
LCN 1-9, DTE(15 digits)
LCN 1-9, DTE(15 digits)
See command pgs.
PVC tl1CR
LCN 1 (PVC)
LCN 2 (PVC)
tl1Maintenance
LCN 3 (PVC)
tl1Memory
Administration
tl1PeerComm
ent-osacmap
ent-osacmap
ent-osacmap
ACID (OS type) ††
TL1 autonomous message type ††
Action to assoc. message
type to OS ††
See command pgs.
See command pgs.
enabled, disabled enabled
ent-tl1msgmap
ent-tl1msgmap
ent-tl1msgmap
Cross-connection type
Ring ID for drop&continue
two-way, dc
m1, m2
two-way
See command pgs.
ent-crs-sts1
ent-crs-sts1
Cross-connection type two-way, dc, locked two-way ent-crs-vt1
Porttype for cit - {1,2}
Porttype for x.25
Baudrate (only if porttype
is TL1 or asynch)
Echo (only if pottype is
TL1 or asynch)
cit, TL1
asynch, synch
1200, 2400, 4800, 9600,
19200
enabled, disabled
cit
synch
9600
enabled
set-secu
set-secu
set-secu
set-sync
Address:
porttype
cit-{1,2}, x.25
cit, TL1 (if address=cit1 or
cit2)
synch, asynch (if
address=x.25)
x.25t
cit
synch
ent-osacmap
ent-osacmap
ent-osacmap
STS-3C cross connection two-way two-way ent-crs-sts3c
Outgoing STS-1 path
trace message 62 characters See command pgs. set-trace-sts1
Expected STS-1 path
trace message 62 characters See command pgs. set-trace-sts1
See notes and footnotes at end of table.
1. Default means factory default (the CIT prompts display current provisioned values).
2. To view the current values, precede these commands with rtrv- instead of set- or
ent-.
* BBG10 required for Releases 8.1 and 9.1.
MegaStar applications only.
Table 8-22. Parameters Provisionable via the CIT—Continued
Parameter Range
Default
(Note 1)
Command
(Note 2)

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English