Maeda MC305C-3 - Page 155

M A E D A Mini-Crawler Crane Section 4 – MODE SETTING OF THE TRANSMITTER
3/2019 MC305C-3 4-91
Loudness Control (Available Only for Units
with Optional Voice Message)
Adjust the volume of voice messages:
Fig. 4-242
1. Shift the cursor (▲ or ▼) using the Hook
raising and lowering lever and select the
appropriate rate.
The volume adjust is by 6 steps, OFF, 1, 2,
3, 4, or ON.
The factory setting for this function is
"MAX".
2. When the desired volume is obtained, push
the Hook stow/Setting button. The condition
obtained in above 1. will be fixed and the
display returns to the A MODE screen.
Acceleration
Adjust the engine speed limit, controllable by the
Accelerator lever:
Fig. 4-243
1. Shift the cursor (▲ or ▼) using the Hook
raising and lowering lever. When all the
bars lights, the speed limit is in maximum,
otherwise, when the all are OFF, it is in
minimum.
2. When the suitable rev limit is obtained, push
the Hook stow/Setting button. The value
obtained in above 1. will be fixed and the
display returns to the A MODE screen.
LCD Backlight
Adjust the time to the auto-cut of the LCD
backlight, after your finger is released from each
of the lever.
Fig. 4-244
1. Shift the cursor (▲ or ▼) using the Hook
raising and lowering lever and select the
preferred time.
The elapse time adjust is by 4 steps, OFF, 1
sec., 3 sec., or 4 sec.
The factory setting for this function is "1
second".
2. When the desired time is obtained, push the
Hook stow/Setting button. The elapse time
in above 1. will be fixed and the display
returns to the A MODE screen.
Off Timer
Adjust the Auto shut-OFF time of the Transmitter
power.
Fig. 4-245
1. Shift the cursor (▲ or ▼) using the Hook
raising and lowering lever and select the
preferred time.
The Auto shut-OFF adjust is by 3 steps, 5
min., 10 min., or 15min.
The factory setting for this function is "5
minutes".
2. When the desired time is obtained, push the
Hook stow/Setting button. The time in
above 1. will be fixed and the display
returns to the A MODE screen.