OPERATING CONTROLS AND INDICATORS TMS9000-2 OPERATOR MANUAL
3-44 Published 02-21-2019, Control # 611-05
Crane operation error menu
Item 1 is the error code and the total number of errors for that
instance. Item 2 is the type of error(s). Item 3 allows the
operator to reset and acknowledge the error or if there is a
prohibition symbol errors are not resettable. They cannot be
cleared without cycling the key on/off. Items 4 and 5 allow the
operator to scroll to other errors.
A list of all fault codes and their definitions are available
through Manitowoc Crane Care to those service technicians
who have attended the Grove New Technology training
course.
Item Description
1 Display of error / total errors
2 Error message display
3 Acknowledging the error
4 Previous error
5 Next error
To Next Page
Loading...
