Grove Published 02-21-2019, Control # 611-05 3-121
TMS9000-2 OPERATOR MANUAL OPERATING CONTROLS AND INDICATORS
Table 3-8 Main/Aux Hoist Function Screen
Hoist Control (Main and Aux)
See Figure 3-176
1. Press the hoist button on the remote control
ONCE. The main hoist screen appears.
2. Press the hoist button on the remote control TWICE.
The aux hoist screen appears.
NOTE: The main hoist screen is the default.
Speed in either direction is proportional to how far
the motion button is depressed.
3. To PAY OUT wire rope from the selected hoist, hold
down either enable button and the left motion button at
the same time. Release both buttons to stop the hoist.
4. To HAUL IN wire rope on the selected hoist, hold down
either enable button and the right motion button at the
same time. Release both buttons to stop the hoist.
5. To exit this screen, press the ESC button on the
remote control. The main screen appears.
Item Indicator Name Description
1 Main Hoist Function
1a - Yellow = main hoist cannot be operated due to a crane fault
1b - Green = main hoist can be operated
2 Pay Out (lower)
2a - Blue = main hoist cannot be operated until either enable button is held down
2b - Green = wire rope can be payed out from main hoist with left motion button
3 Haul In (hoist)
3a - Blue = main hoist cannot be operated until either enable button is held down
3b - Green = wire rope can be hauled in on main hoist with right motion button
4 Aux Hoist Function
4a - Yellow = aux hoist cannot be operated due to a crane fault
4b - Green = aux hoist can be operated
5 Pay Out (lower)
5a - Blue = aux hoist cannot be operated until either enable button is held down
5b - Green = wire rope can be payed out from aux hoist with right motion button
6 Haul In (hoist)
6a - Blue = aux hoist cannot be operated until either enable button is held down
6b - Green = wire rope can be hauled in on aux hoist with right motion button
7 Enable Button Status
7b - White = both enable buttons released (operation disabled)
7a - Green = either enable button held down (operation enabled)
To Next Page
Loading...
