Grove Published 02-21-2019, Control # 611-05 3-125
TMS9000-2 OPERATOR MANUAL OPERATING CONTROLS AND INDICATORS
Table 3-10 Swing Function Screen
NOTE: The top of the remote control corresponds to the
front of the crane (carrier cab is at front). The terms
left and right correspond to the operator’s left and
right sides when looking forward from the front of
the crane.
Swing and 360° Swing Lock
See Figure 3-178
Swinging
1. Press the swing button on the remote control
ONCE. The swing screen (1) appears.
NOTE: Speed in either direction is proportional to how far
the motion button is depressed.
2. To swing LEFT, hold down either enable button and the
left motion button at the same time.
3. To swing RIGHT, hold down either enable button and the
right motion button at the same time.
4. The swing angle is shown in the DEG screen (8).
Operating 360° Swing Lock
1. Press the swing button on the remote control
ONCE if already at the swing screen or TWICE if at the
main screen. The 360° swing lock screen (4) appears.
2. To LOCK the 360° swing lock, hold down either enable
button and the left motion button at the same time.
3. To UNLOCK the 360° swing lock, hold down either
enable button and the right motion button at the same
time.
Exiting Swing/360° Swing Lock Screen
To exit this screen, press the ESC button on the remote
control. The main screen appears.
Item Indicator Name Description
1 Swing Function
1a - Yellow = swing cannot be operated due to a crane fault
1b - Green = swing can be operated
2 Swing Left
2a - Blue = cannot swing left until either enable button is held down
2b - Green = can swing left with left motion button
3 Swing Right
3a - Blue = cannot swing right until either enable button is held down
3b - Green = can swing right with right motion button
4
360° Swing Lock
Function
4a - Yellow = swing lock cannot be operated due to a crane fault
4b - Green = swing lock can be operated
5 Lock
5a - White = cannot engage swing lock until either enable button is held down
5b - Green = can engage swing lock with left motion button
6 Unlock
6a - White = cannot disengage swing lock until either enable button is held down
6b - Green = can disengage swing lock with right motion button
7 Enable Button Status
7a - White = both enable buttons released (operation disabled)
7b - Green = either enable button held down (operation enabled)
8 DEG Screen Shows the swing angle in degrees
To Next Page
Loading...
Need help?
General
