Manitowoc Grove TMS9000-2 Series - Page 389

GROVE 6-53
TMS9000-2 OPERATOR MANUAL SET-UP AND INSTALLATION
6
Published 02-21-2019, Control # 611-05
6. In the cab on the CCS display, press menu and then
select the extension menu (Figure 6-95). To use the
hand-held remote controller refer to Boom Extension
Assist, page 3-127.
7. Select pin #1, unlock (Figure 6-96).
8. The icons turn green, verifying pin #1 is unlocked
(Figure 6-97).
NOTE: Pin #1 will not unlock if pin #2 is unlocked.
9. Verify pin #1 is unlocked (1, Figure 6-98).
FIGURE 6-95
8969-7
FIGURE 6-96
8969-8
FIGURE 6-97
8969-9
FIGURE 6-98
8969-10
1
9728-5
Design B
Design A
1
Locked
Unlocked