Grove Published 02-21-2019, Control # 611-05 3-29
TMS9000-2 OPERATOR MANUAL OPERATING CONTROLS AND INDICATORS
1)
Optional equipment
Item Item Description
1 Engine speed display Current engine RPM
2 Voltage monitoring display System voltage
3 Coolant temperature display Engine coolant temperature
4 DEF level Amount of DEF in reservoir
5 Exhaust System Cleaning Inhibited
Indicates exhaust system cleaning function is
prevented
6 Exhaust System Cleaning Needed Indicates the exhaust system needs to be cleaned
7 Hydraulic Oil Temperature Temperature of the hydraulic oil
8 Fuel level display Amount of fuel in the reservoir
9 Menu Selection Opens sub-menu
10 Outrigger Menu Opens the outrigger menu
11 Camera Display Opens the camera menu
12 Telescoping semi-automation menu
Opens the telescoping semi-automation menu, refer to
page 3-52
13 Telescoping Manual Mode Opens telescoping manual mode menu
14 Telescoping Emergency Mode Opens telescoping emergency mode menu
15 Swing Function Status Indication Indicates when the swing function is active
16 Telescoping Function Status Indication Indicates when the telescoping function is active
17 Lift Function Status Indication Indicates when the lift function is active
18 Remote Controller Status Indication Indicates when the remote controller function is active
19 Main Hoist Function Status Indication Indicates when the main hoist function is active
20
Auxiliary Hoist Function Status Indication
(1
Indicates when the auxiliary hoist function is active
21 Hoist camera View of hoists
22 Right side view camera View of the right side of the crane
23 High exhaust system temperature Indicates that the exhaust system temperature is high
24 DEF low warning Indicates that the DEF is getting low in the tank
25 Most often used menus
Shows the menus that are used most often so they can
be opened
26 Alert icon.
Displays up to five icons when errors are present,
refer to Alert Icons, page 3-30.
27 Display active. Only appears on the active display.
To Next Page
Loading...
Need help?
General
