Megger MFT-X1 - Download Results to a Remote Device; Creating a Certsuite Account; Installing Certsuite on a Mobile Device

16. Download results to a remote device
The instrument can be connected to a range of remote devices for receiving the test results and passing them to the
cloud-based Megger CertSuite™ software. They are:
 Android phones and tablets
 Apple IOS
®
phones and tablets
 Windows based PCs and tablets
Each result can be transferred from the instrument to a mobile device running CertSuite™, from which they are
automatically transferred to the cloud if a network is available, or immediately a mobile network is detected if not
available at that time.
Test results on the mobile device are synchronized with the cloud system every 90 seconds to reduce any risk of data
loss from the mobile device.
A summary of the installation sequence is:
1. Create a CertSuite™ account on the CertSuite™ web site
2. Install CertSuite™ on your mobile device
3. Switch on the Bluetooth
®
mode on the MFT-X1 from the Settings section (Refer to 15.5.11 Network
connection on page 82.)
4. Log into your CertSuite™ application on your mobile device using your account details from (1) above
5. Connect CertSuite™ to your mobile device
NOTE : The MFT-X1 does NOT need to be connected to a mobile device. The CertSuite™ software should
find the instrument if the MFT-X1 and mobile device Bluetooth
®
are active.
16.1 Creating a CertSuite™ account
Before CertSuite™ can be used an account has to be created. This can be done by going to www.CertSuite.info
and select the FREE TRIAL option.
Follow the guidance on the CertSuite™ web site.
Keep a record of your account information and password as you will need this when using CertSuite™
on mobile devices.
If necessary, any assistance can be accessed through the CertSuite™ (www.CertSuite.info) or Megger web sites
(www.megger.com) and Megger technical support (uksupport@megger.com).
16.2 Installing CertSuite™ on a mobile device
CertSuite™ can be installed from the relevant Android or IOS store.
Use these links to take you to CertSuite download page
CertSuite™ requires typically 34 Mb of memory space.
The software has a free one-month trial period.
Follow your normal installation process for either platform.
Once installed on the mobile device, follow the installation process
in the software.
Assistance and guidance are available at:
www.CertSuite.info
www.megger.com MFT-X1
89
Download results to a remote device