Section 7 - Environment and Navigation Menu
Page 96 90-8M0070299 eng MAY 2012
Viewing Trip Log Information
The "TRIP LOG" screen displays the time, distance traveled, and average performance since the last reset.
a - Trip time
b - Distance traveled
c - Fuel used
d - Fuel economy
e - Fuel remaining
f - Average speed
g - Engine run time
• Trip time is the amount of time the VesselView has been operated since the last reset.
• Fuel economy displays the average fuel use since the last reset. By default, this is calculated in miles per gallon.
• Fuel used is the total amount of fuel used from all tanks since the last reset.
• Average speed displays the average boat speed since the last reset.
• Distance shows the distance traveled since the last reset.
• Run time shows the total hours the engines have been running since the last reset.
• Fuel remaining is the total fuel amount left in all tanks. This amount cannot be reset.
Resetting Trip Log Amounts
1. From the "TRIP LOG" screen, press the check button. VesselView displays the reset dialog box.
Trip log reset pop-up window
2.
Press the check button to confirm your choice to reset the trip log screen, or press the "X" button to cancel the reset.
NOTE: The fuel remaining value cannot be reset through this menu.
To Next Page
Loading...
Need help?
General
