EasyManuals Logo

Mercury VesselView User Manual

Mercury VesselView
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Section 4 - Main Menu
Page 66 90-8M0070299 eng MAY 2012
NOTE: After any change or customization to the VesselView configuration, a blue pop‑up message will appear as a reminder to
save the session. It is recommended that all session changes be saved before holding the "
X
" button while keying all engines
off. Refer to
Section 1
Saving the Settings
.
Alarms
Alarms Menu Options
The "Alarms" menu enables you to view the active alarms, active alarm details, view and manage the alarm history, and view
alarm history details. The "Alarms" menu items include the following:
Alarms
Alarm History
Active Alarms
Main
Favorites
Calibrate
Settings
Alarms
System Info
47870
Maintenance
VesselView Warning Horn Strategy
VesselView is equipped with a warning horn on its harness. This horn will sound alarms for critical tank level and low water
depth. The engine fault warnings will be visible on the VesselView screens, but the horns will be generated at the engine key
switch harness. If you prefer to have warning horns from both sources, go to the "WARNINGS" screen of the "Settings" menu
and turn the horn on. The horn is turned off by default. The menu path is: "Main" > "Settings" > "Warnings."
All engine alarms will be heard through the engine key switch harness horn regardless of the VesselView warning horn setting.
If the horn is turned on in the "WARNINGS" screen, the engine alarms will also be heard through the VesselView horn. The
VesselView horn will sound a solid tone for all faults and the engine warning horn will sound its specific warning tone. Check
the engine operations manual for possible warning horns for your engine.
NOTE: The warning horn strategy of the VesselView may not be the same horn strategy as the engine.
If the warning horn is turned on in the "Warnings" menu and you are experiencing a VesselView alarm, press the "X" button, or
check button, to acknowledge the fault and turn off the audible alarm.
The low water depth alarm is set in the "DEPTH" screen of the "Environment and Navigation" menu. This menu enables you to
turn the horn on or off. Low water depth alarms will be audible even if the warning horn is turned off in the "WARNINGS"
screen.
The low fuel tank level alarm cannot be turned off. The fuel tank level at which the alarm will sound can be adjusted down to
10% in the "WARNINGS" screen. The menu path is: "Main" > "Settings" > "Warnings."

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury VesselView and is the answer not in the manual?

Mercury VesselView Specifications

General IconGeneral
Display TypeLCD
TouchscreenYes
Power Supply12V DC
Waterproof RatingIPX7
ConnectivityNMEA 2000, Bluetooth
GPSYes
AlarmsYes
Resolution800 x 480 pixels
Mounting TypeFlush mount
Data DisplayedEngine data, fuel usage, GPS

Related product manuals